CATEGORY


Tascam MM-2D-E 2-Channel Mic/Line Input/Output Dante Converter with Built-in DSP Mixer

Brand: Tascam 

Model Number: MM-2D-E

Product Code: QD2341

Availability: In stock

AED 3,347.40

The Tascam MM-2D-E Channel Mic/Line Input/Output Dante Converter with Built-In DSP Mixer is a compact half-rack converter that can be used to convert 2-channel mic/line input/output signals on Euroblock connectors into 4 Dante channels or the other way around for pro-audio applications.

The Tascam MM-2D-E Channel Mic/Line Input/Output Dante Converter with Built-In DSP Mixer is a compact half-rack converter that can be used to convert 2-channel mic/line input/output signals on Euroblock connectors into 4 Dante channels or the other way around for pro-audio applications.

The MM-2D-E Input/Output Dante Converter features level control and is compatible with Dante Domain Manager software, which offers security functions, enables the use of wide-area networks, and provides easy access to Dante systems using already established network infrastructures. With AES67 mode, connection to AES67 network systems is also possible. Two installation brackets and four Euroblock plugs are included.

Features

  • 2 analog input/outputs on Euroblock connectors
  • 4 Dante inputs/outputs
  • Supports PoE (Power over Ethernet)
  • Sample rate up to 24-bit / 96 kHz
  • Supports Dante daisy-chain, which allows two Dante Compact Processor models to be connected without a network switch
  • Compatible with Dante Domain Manager and Dante AES67 mode
  • Flexible scene preset function allows you to work in different area situations (up to 50 presets)
  • Two types of user-control software available for Windows/Mac/iOS/Android devices:
  • TASCAM DCP CONNECT, for integrators: input/output routing selection, DSP/design/scene settings of the complete system, etc.
  • TASCAM EZ CONNECT, for end-users: simple app design for only the necessary functions such as area-volume settings, etc.
  • Remote control via Dante
  • Half-rack mountable size
  • Equipped with indicators that show LAN/Dante connection status and sample rate
  • Equipped with signal indicators that monitor digital input/output signals
  • Configurable reference level (via remote control only)
  • Surface-mount adapters for installation under desks included


Specifications

Formats Supported

44.1/48/88.2/96 kHz, 16/24-Bit, 2 Channels

Connector

RJ-45

Transmission Protocol

Dante

Gigabit Ethernet

1000 BASE-T (IEEE 802.3ab)

Cable

Category 5e or Faster STP Cables

Connector

Euroblock (Balanced) 3.81 mm Pitch

Minimum Input Level

-74 dBu

Maximum Input Level

+26 dBu

Input Impedance

2.0 kOhms or Higher

Connector

Euroblock (Balanced) 3.81 mm Pitch

Nominal Output Levels

+4 dBu (when Ref. Level not ?9 dBFS)
+6 dBu (when Ref. Level set to ?9 dBFS)

Maximum Output Level

Switchable:
+15 dBu (Ref. Level: ?9 dBFS)
+18 dBu (Ref. Level: ?14 dBFS)
+20 dBu (Ref. Level: ?16 dBFS)
+22 dBu (Ref. Level: ?18 dBFS)
+24 dBu (Ref. Level: ?20 dBFS)

Output Impedance

200 Ohms or Lower

External Control Interface

LED/Switch: Euroblock (Balanced) 3.81 mm Pitch

LED

Connectors: Open Collector (10 Ohms Output Impedance, 48V withstand Voltage, 35 mA Maximum Current)
Low level Maximum Output Voltage: 0.5 V

Switch Connectors

Maximum Input Voltage: 5.5 V
High-Level Minimum Input Voltage: 2.31 V
Low-Level Maximum Input Voltage: 0.99 V

Mic In to Dante Out

Mic Amp EIN (Equivalent Input Noise): -125 dBu (150 Ohms, 22 kHz LPF+A, JEITA)

Frequency Response

±0.5 dB: 20 Hz to 20 kHz (44.1/48 kHz Sampling Frequency, JEITA)
±0.5 dB: 20 Hz to 40 kHz (88.2/96 kHz Sampling Frequency, JEITA)

Distortion

0.005 % (when -1 dBFS Input, 44.1/48/88.2/96 kHz Sampling Frequency, JEITA)

Signal to Noise Ratio

105 dB (44.1/48/88.2/96 kHz Sampling Frequency, JEITA)

Crosstalk

100 dB (44.1/48/88.2/96 kHz Sampling Frequency, JEITA)

Dynamic Range

105 dB (44.1/48/88.2/96 kHz Sampling Frequency, JEITA)

Frequency Response

Dante In / Line Out:
±0.5 dB: 20 Hz to 20 kHz (44.1/48 kHz Sampling Frequency, JEITA)
±0.5 dB: 20 Hz to 40 kHz (88.2/96 kHz Sampling Frequency, JEITA)

Distortion (THD)

0.005 % (when -1 dBFS Input, 44.1/48/88.2/96 kHz Sampling Frequency, JEITA)

Signal to Noise Ratio

105 dB (44.1/48/88.2/96 kHz Sampling Frequency, JEITA)

Crosstalk

100 dB (44.1/48/88.2/96 kHz Sampling Frequency, JEITA)

Dynamic Range

105 dB (44.1/48/88.2/96 kHz Sampling Frequency, JEITA)

Power

PoE Class 0
Tascam PS-P1220E AC Adapter (Sold Separately)

Power Consumption

6 W

Operating Temperature

32 to 104°F / 0 to 40°C

Dimensions (W x H x D)

21.4 x 4.4 x 13.6 cm

Weight

878 g

Package Weight

1340 g

Package Dimensions (L x W x H)                       

34.29 x 33.27 x 23.62 cm

0 (Overall)

Based on 0 Comments
(0)
(0)
(0)
(0)
(0)
(0)

Related Product